Apple's Laptops are fabulous the way they were designed. Since the first unibody Aluminium Macbook, i had been an owner. Everyday usage, suggests to me for work or leisure, the optical drive - super drive from apple, have rarely serve any purpose. Dead weight to be carry around not productive for its purpose.
MCE Optibay is a product that replaces the laptop's internal Drive for a second harddrive (Solid State Device or another Harddrive with more storage capacity) to allow more productivity for the Macbook.
But MCE Optibay comes with a premium price of US$99.00! (DIY)
That is a lot of money, i hear you say. and i concur with what you have in mind. Is there an alternative? and afterall, it is most probably is MIC.
The Optibay alternative i recommend is from ebay from the Far East. I installed my OCZ SSD thru the optibay system for my macbook. I would like to share this and write this procedure to ensure you can do the same and enjoy the pros of optibay but NOT the cons of the big price tag of MCE Optibay. (for simplicity, i will just call the part Optibay)
The demonstration below is an aluminum unibody Macbook (late 2008 model), OCZ SSD Vertex2 60Gb and the Super Slim USB2.0 external Superdrive housing (Optional)
Tools Required, Optibay 9.5mm SATA connection, a SATA harddisk, small philips screw driver, small magnet or bowl to keep the small screws from the apple laptop/computer, a clear desktop for the modification.
Steps | Picture illustration | description |
1 |  | The package i got:
Left: Super Slim USB2.0 external housing for the Apple's SuperDrive
Right: Caddy, Fenvi MCE Optibay Alternative 9.5mm for Apple Macbook, Macbook Pro, MacMini, iMac - SATA connection |
2 |  | Remove the content from the package |
3 |  | Removing them from the plastic bags.
(Caution: keep the plastic bags out of children) |
4 |  | All the required tools required layed out ready for the drive swap |
5 |  | First of all, disconnect the battery and mains power supply from the macbook. it may take up to an hour for the internal parts to cool down. Be Caution of the hot parts (CPU and heatsinks)
For the Unibody Macbook pros and Unibody White Macbook, remove the bottom side screws, will get us to the same position. Go to Step7 |
6 |  | Screws for the external panel. careful not to lose them. the small screws have slightly different size. best practise is to keep or label which screw is for which panel hole. |
| |
|
7 | | Should you need to swap this harddrive out. Take out the bracket that holds the stock Hard drive located in the middle of the macbook, (one screw for my case, two screws for the unibody White Macbook, probably the same for Macbook pros) I took this out only for illustration purpose. There is a great debate on where to put the SSD here. I decided to put the SSD with the Optibay. |
8 |    | After removing the bottom panel of the laptop, we see the Super drive located just beneath the black strip speakers.
Remove the screws Green circle and Orange Circles from the Speaker housing assembly. Removing the screws alone should create sufficient space to extract the SupderDrive
The Cyan Arrow points to the SATA connection to the logic board. Disconnect by lifting up the Amber/Brown printed Circuit cable Socket from the logic board
There are 3 screws Red Circles to unscrew to set the SuperDrive Free.
The side that has the single screw's tab is removable, unscrew two screws to remove that tab and install it on the Optibay's equivalent position. |
9 |  | This shows the Optibay.
Remove and discard the Black tab by lifting up. This serves NO purpose for the macbook, No need to keep. |
10 |  | This shows the SuperDrive replacement side by side.
Remember the small tab from the SuperDrive AND the Amber/Brown SATA Printed Cable and connector, BOTH REQUIRE to be transferred to the Optibay
|
11 | 
 | Release the SATA HDD tab by its sides and lift up, this part is used to secure the harddisk's position after installation. Install the hard drive to the Optibay. there is only one way you can fit in. Ensure the SATA connection is made there should be a gap, slide in the SATA HDD plastic tab, you should hear two clicks which locks the hard disk in position |
12 | 
 | Put the Optibay and harddisk assembly to the SuperDrive's position.
There is only ONE screw thru the replaced tab we took off from the superdrive. becareful not to harm the display black cable routed round there.
after securing the unit with the screw. Re-connect the Amber/Brown printed circuit cable/connector to the Logic board.Make SURE the connection is made!! |
13 |  | it should not be lose. |
14 |  | this angle shows a better view of the SATA connecting the logic board
After this is done. Put the bottom lid back on carefully! This is the LAST STEP for the Macbook. If you have purchased the USB external enclosure for the SuperDrive goto Step15 |
15 |  | open the unit.
there is a printed circuit board with a USB cable as shown. remove it from the housing.
place some electrical insulation tape just to the underside of the SuperDrive to prevent short circuits. this is only for a pre-cautionary measures.
Alignment of the SuperDrive's Disc Insert to the enclosure's lip is critical. |
16 |  | Tolerence of the disc extract is quite low, you may need to fiddle a little bit by placing 0.5mm to 1mm to raise the superdrive's disc' input end to the grey side of the housing.
Plugin the circuit board, it is a SATA2 connection and should just fit.
Slide in the disc end to the housing first then slowly return the circuit board to its housing.
before you close the Black Lid. Testing of the unit is recommended by connecting it to your macbook. Point to note. MAKE SURE the discs can Eject before closing the lid.
the lid is closed by gently pressing down to the grey housing. you should here ONE click when it is in position. do NOT force it in. pressing it too much may come into contact with the DVD drive, as it is a slim case, pressing in by force may restrict the Disc spinning area! Gentle is the key to success. |
17 |  | Once it is all complete, it looks something like this. it took me under 20mins for the whole procedure.
Enjoy your second hard drive!!!
P.S. Please be very careful when opening apple's products. careless tweaks may cause damage and warranty void. I have done this without any problems! however any damage you have done, i do not hold responsibility for. |
18 | 

 | This is the screen shot of the system showing everything in place.
there are many ways how you want to set up your OSX. i did it my way with various reasons. Have fun with the new drive. |
For further tweaks and optimization for booting in the optibay drive, or info regarding setup. Click HERE